Solar stations accessories

Gravity brake suitable for single channel solar station SFE 25. Multifunctional isolation valve with thermometer and integrated metal gravity brake adjustable by 45° setting of the thermometer control. Connections with cutting ring threaded connections (including support sleeves).

Single-line expansion module (return flow system) for East-West systems or additional tanks, consisting of Grundfos Solar circulation pump, measuring section with integrated VFS flow and temperature sensor, multi-functional isolation valve with thermometer and integrated metal gravity brake (adjustable by 45° setting of thermometer control), filling and flushing connections with KFE valve, connection points with solar flat seals, wall mount, solar connections with compression fittings, EPP heat insulation jacket.

Single-line expansion module (return flow system) for East-West systems or additional tanks, consisting of Grundfos Solar circulation pump, measuring section with integrated VFS flow and temperature sensor, multi-functional isolation valve with thermometer and integrated metal gravity brake (adjustable by 45° setting of thermometer control), filling and flushing connections with KFE valve, connection points with solar flat seals, wall mount, solar connections with compression fittings, EPP heat insulation jacket.

Flow sensor without moving parts and with integrated temperature measuring for liquid media, complete with flow measuring section and brass fittings. Fast response behaviour by direct contact to the medium. Suitable for heat quantity metering in combination with TiSUN solar control unit.

Sensor module for measuring flow, pressure and temperature, for system monitoring and heat quantity metering. The sensor module consists of 2 sensor measuring sections incl. pressure and flow sensor with pipe manifold preassembled ready for installation. The sensors may be connected to the TiSUN Duplex Basic or Multiplex Advanced solar control unit.

Insulation shell for covering and insulation of the connection piping of the solar station on the tank. Suitable for solar station SF 25/50, SSR 25/50, SSRH 50 and tank FS/1R. The bottom insulation shell covers the connection piping between the solar station and the tank coil. The top insulation shell covers the connection piping to the collector on the tank.

For connecting solar stations SF 25/50, SSR 25/50 or SSRH 50 to the FS tank. The set consists of 2 connecting cables (connection to solar station with cutting ring threaded connection or the flat-sealed connections to the tank, with flat seals).

Prevents stagnation of collector arrays up to 100 m² and thus rapid material fatigue. Applications include zones with above-average solar radiation or systems with maximised solar coverage factor. A 3-way switching valve determines whether the solar circuit is cooled or runs in normal mode. The unit is completely fitted with pipes and needs only 2 compression fittings for connection to the solar circuit. Because the entire unit is designed to be weather- and corrosionresistant outdoor installation is possible.

Ready-to-install swimming pool charging station consisting of stainless steel plate heat exchanger, on the solar system side 2 connections with isolation valves, 2 sensor Sensor pockets for pump control and overheating protection of the plastic swimming pool pipes. On the swimming pool side, 2 stainless steel connections with isolation valves

The universal, ready-to-mount secondary pump group used for tank loading is pressure-tested and functionally checked and consists of Grundfos circulation pump, thermometer, ball valve, flat seals and heat insulation jacket.